Kenwood d72 syncterm update#
You can update the TH-D72A/E main firmware by connecting the TH-D72A/E to the PC by using a USB cable supplied with the TH-D72A/E.Ī virtual COM port driver needs to be installed onto the PC to use the firmware updating program with a USB cable.ĪTTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver. We are offering the firmware updating program to the TH-D72A/E owners. After you do that, press the "Start" menu item and the computer and radio will attempt to make a 's obvious when the connection is made!Īssuming you have some local packet nodes, you're all set to send/receive email using the Winlink system and your Kenwood TH-D72 HT.The TH-D72A/E main firmware has been updated from Version 1.09 to Version 1.10 as follows. You need to do this manually on the radio. The application will close the current window and display a message toward the top of the menu on the resulting screen indicating the frequency you need to set.
When it's done updating, double click on a station that is close to you. This selection will update your PC with all of the known Winlink packet nodes. Next, you need to choose the "Channel Selection" menu. I ignored the warning and didn't have any problems, but you might want to heed the recommendations if your results are not satisfactory. Click the Update button, which will probably result result in a warning about some of the settings. In most cases, you will probably be using 9600 baud.
Kenwood d72 syncterm serial#
Next pick the appropriate serial port and speed. Choose either the "A-Band" or "B-Band" selection depending on how you have the TNC in your radio configured. We need to choose the type of TNC that we're using, which should be one of the Kenwood TH-D7 entries. On the new screen that pops up, click "Setup" on the menu. After you select "Packet WL2K", click on "Open Session" to go to the next step. To do that, select "Packet WL2K" in the dropdown menu on the top right next to the "Open Session" menu item. You have to configure the connection between RMS Express and the radio. If your TH-D72 isn't connected to the computer yet, now is the time to hook it up. It's important to use both your real callsign and you grid square location.
Kenwood d72 syncterm install#
If you need to make changes to the install questions asked during setup, you can always access the options from the "Files / RMS Express Setup" menu item. Unzip it, install it and run through the basic configuration. You can download the current copy from Programs/RMS Express Setup 1105.zip. The software you need to use to accomplish this is called RMS Express. Make note of the assigned COM port and speed because you will need to know it.
Here's how you do it.įirst, I'm assuming that your computer already has the capability to connect to the Kenwood TH-D72 using the USB cable for programming. Tonight I configured my radio to do just that and was very successful. One of the site members asked a question publicly and of me in private if there is a way to use the Kenwood TH-D72 to connect to the Winlink system.
0 kommentar(er)
